The Titanium Highline Micro Bananabell is Wildcat's versatile micro banana made from premium quality titanium. It has a 1.2mm (16ga) stem thickness and is available in a number of stem lengths as well as in the polished Ti-glo finish or anodised colours!This article is also available in Titanium Blackline (KMB), Titanium Zirconline (GMB) and in Steel Basicline (MBB).
The premium processed Titanium Highline Barbells are the perfect standard barbell for your piercings. They are available in a number of size combinations (stem thickness, stem length and ball size). Barbells from 1.6mm (14ga) up to the 2.4mm (10ga) are externally threaded, from 3.0mm upwards they are internally threaded! Sizes: Stem Thickness: 1.6 mm (14ga) - Length: 6mm up to 64mm (in 1mm increments) - Ball options: 4, 5 or 6mm Stem Thickness: 2.0mm (12ga) and 2.4mm (10ga) - Length: 10, 13, 16, 19, 22 and 25mm Stem Thickness: 3.0mm (8ga) - Length: 6mm up to 20mm (in 2mm increments) Stm Thickness: 4mm - Length: 6mm up to 20mm (in 2mm increments) as well as 13.0 mm Stem Thickness: 5.0mm - Length: 6mm up to 20mm (in 2mm increments) as well as 13mm Stem Thickness: 6.0mm (2ga) - Length: 6mm up to 20mm (in 2mm increments) Stem Thickness: 7mm and 8mm (0ga) - Length: 6mm up to 20mm (in 2mm increments)
The Titanium Highline Bananabell is made from premium quality titanium and is the perfect titanium version of the versatile bananabell! With a 1.6mm (14ga) stem thickness, this bananabell is available in lengths from 4mm to 16mm and with differing combinations of 4mm, 5mm and 6mm ball diameters. This article is also available in Titanium Zirconline (GNB), Steel Basicline (BAN), Titanium Blackline (KNB) and in Steel Blackline (KBB).
The Titanium Highline Surface Barbell is made from premium quality titanium and is a fantastic choice for surface piercing!The barbell is available in both 1.2mm (16ga) or 1.6mm (14ga) stem thicknesses and in a number of stem lengths. It comes with 5mm diameter balls and if you are looking for replacements, they can be found in the Titanium Highline range under the code TTB.
The Titanium Highline Jewelled Nostril Stud is a premium processed jewelled nose stud made of high quality Titanium. Pony-tail stem style and available in both 1.0mm (18ga) and 1.2mm (16ga) stem thicknesses. Choose from a range of different colours: Crystal AB (AB), Amethyst (AM), Clear Crystal (CC), Citron (CT), Cobalt Blue (CO), Red (RE), Sapphire Blue (SB) and Light Blue (LB).
The Titanium Highline Flesh Tunnels are made from premium processed titanium and are internally threaded, resulting in a premium quality and comfortable tunnel! Available in outside diameters from 3mm, 4mm and 5mm then from 6mm up to 20mm (in 2mm increments). You also have two choices of lengths of the tunnel, 7mm or 9mm.
The Titanium Highline Micro Labret Stud has a 1.2mm (16ga) stem thickness and is available in stem lengths from 5mm up to 10mm (in 1mm increments) and in 12mm. It comes standard with a 3mm diameter ball.This article is also available in Titanium Blackline (KZL) and Titanium Zirconline (GZL).
Invictus Threadless Titanium Ball Attachment.This threadless titanium ball attachment comes in a 3mm, 4mm and 5mm ball size and fits into any Invictus Titanium Threadless Stem. The classic titanium top ball is available in a threadless style for the perfect look - simple and stylish - and one that will never go out of fashion.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Made from premium grade G23 surgical titanium, these labrets are the perfect basic jewellery. Have a look through our fabulous range of internally threaded attachments to create something unique!
Titanium Internally Threaded Bezel Set CZ Spiderweb Top. Available in Clear Crystal & Black Crystal. Size: 7.60mm (L) x 5.05mm (W) x 1..56mm (THK), Threading: 16G(1.2mm). Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136).
Internally Threaded Titanium Prong Set Synthetic Opal Double Gem 14g 7/16 (11.11mm) Navel Curves. No Glue used to set gems. Counter Sunk Balls are solid and one piece. Available in 4 colors. Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Titanium Internally Threaded with Bezel Set 1mm CZ Dagger Top. Available in Clear Crystal & Black Crystal. Size: 10.5mm (L) x 3.1mm (W) x 1.7mm (THK), Threading: 16G(1.2mm). Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136).
Made from premium grade G23 surgical titanium, these circular barbells are available in plain polish (ti-glo) or in a range of great anodised colours!Ring Thickness: 1.6mm (14ga)Internal Diameters: 8, 10 or 12mmColour options: Ti-Gloâ„¢ (TG), Dark Blue (DB), Light Blue (LB), Purple (PU), Dark Green (DG), Rainbow (RB)
Made from premium grade G23 surgical titanium, these labrets are the perfect basic titanium labret!Stem Thickness: 1.6mm (14ga)Stem Lengths: 5, 6, 7, 8, 9, 10, 12 or 14mm
Invictus Threadless Titanium Cone Attachment. This threadless titanium cone attachment measures 3mm x 4mm and fits into any Invictus Titanium Threadless Stem. Punky and funky, this threadless titanium spike cone top is small enough to be subtle, yet still makes a bold statement. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish. To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment. Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery. The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory. The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Bezel Set Synthetic Opal Attachment.This threadless titanium bezel set synthetic opal attachment comes in a 1.5mm, 2mm, 2.5mm, 3mm, and 4mm Synthetic Opal in various colours and fits into any Invictus Titanium Threadless Stem. Our threadless front-facing top is made from titanium and synthetic opal - and comes in a selection of colors and sizes to ensure it will look great no matter where it is placed.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Made from premium grade G23 surgical titanium, these micro cone bananabells are available in plain polish (ti-flo) and in a range of great anodised colours! Stem Thickness: 1.2mm (16ga) Stem lengths: 8, 10mm Colour options: Ti-Gloâ„¢ (TG), Dark Blue (DB), Light Blue (LB), Purple (PU), Dark Green (DG), Rainbow (RB)
Made from premium grade G23 surgical titanium, these jewelled labrets are available in plain polish (ti-glo) or in a range of great anodised colours!Stem Thickness: 1.2mm (16ga)Stem Lengths: 6, 8, 10 or 12mmColour Options: Dark Blue, Light Blue, Purple, Rainbow, Ti-Glo, Dark Green and YellowStone Colour: Clear Crystal
Material: Titanium Highline Stem Thickness: 1.6mm Stem Height: 2.3mm Base Length: 7mm Disc Diameter: 4mm Disc Options: Clear Crystal (CC) or Plain For Professional Use Only
Invictus Threadless Titanium Curved Barbell Stem.Our threadless titanium curved barbell stem comes in multiple gauges and lengths, and is designed to accommodate any Invictus threadless top. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.PLEASE NOTE: This product listing is for the stem ONLY; Attachments are sold seperately.
Made from premium grade G23 surgical titanium, these micro threaded balls are available in plain polish (ti-glo) and in a range of great anodised colours! Perfect for replacments or in combination with our many stems or posts to create a new item!Thread Compatibility: 1.6mm (14ga)Ball Diameter: 4, 5, 6 or 8mmColour options: Dark Blue (DB), Dark Green (DG), Light Blue (LB), Purple (PU), Rainbow (RB), TiGlo (TG)
Internally Threaded Titanium Prong Set Trinity. 0.9mm thread for 16g and 18g internally threaded jewellery. Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Titanium Threadless Prong Set Marquise CZ 2-Cluster Top. Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewelry line. Pin Size: 0.45mm x 4.7mm. Size: 6.30mm (L) x 4.13mm (W) x 1.85mm (THK). This Threadless Top is made from Implant Grade Titanium TI-6AL-4V ELI ASTM F136 with 25g d
Invictus Threadless Titanium Dome Attachment.This threadless titanium dome attachment comes in a 2.5mm, 3mm, and 4mm dome size and fits into any Invictus Titanium Threadless Stem. Our titanium threadless dome top is available in multiple sizes for the best look and fit, and is a piece that is easy to use in an ear project or a fresh piercing.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Barbell Stem.Our threadless titanium barbell stem comes in multiple gauges and lengths, and is designed to accommodate any Invictus threadless top. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.PLEASE NOTE: This product listing is for the stem ONLY; Attachments are sold seperately.
Titanium Threaded 5.25mm Flower Top fits M0.9 or 18g/16g Internally Threaded Jewelry. Made of only TI-6AL-4V ELI ASTM F136 with Bezel Sets Gems inside Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewelry and it's fully autoclavable.
The Thin Edge Tunnel from the Titanium Highline range is made of premium quality Titanium and is available from 2mm up to 22mm (in 1mm increments) and then from 24mm up to 30mm (in 2mm increments). They all are 8mm in width. These particular tunnels are not only internally threaded but have a 'slimline' edge, a much thinner rim than normal tunnels. Perfect for the larger lobes where something lightweight is required.
