16g Titanium Internally Threaded Low-Profile Bezel Set Swarovski Crystal Dermal Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Our newest collection of internally threaded flat bezel tops, feature a low profile that sits flush with the piercings. Great for surface, dermal, & basic bezel piercings. Genuine Swarovski Crystals in 7 colour options: Amethyst, Aurora Borealis, Clear, Emerald, Jet, Pink and Blue Sapphire. Available in 16g 2.5mm, 3mm and 4mm bezel. Material sourced in the USA.
16g Titanium Internally Threaded Low-Profile Bezel Set Synthetic Opal Dermal Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Our newest collection of internally threaded flat bezel tops, feature a low profile that sits flush with the piercings. Great for surface, dermal, & basic bezel piercings. Synthetic Opal in 7 colour options: Green, Purple, Blue, Black, Pink, Red and White. These tops are great for our surface bars, floating navels, labret posts and dermal bases. Material sourced in the USA.
14g Black PVD Titanium Internally Threaded Low-Profile Bezel Set Swarovski Crystal Dermal Top.Our newest collection of internally threaded flat bezel tops, feature a low profile that sits flush with the piercings. Great for surface, dermal, & basic bezel piercings. Genuine Swarovski Crystals in 7 colour options: Amethyst, Aurora Borealis, Clear, Emerald, Jet, Pink and Blue Sapphire. 14g 3mm, 4mm and 5mm bezel. Material sourced in the USA. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with Titanium Nitride (TiN) using the Physical Vapor Deposition (PVD) process. The PVD coating bonds at the atomic level to the titanium, creating a chemically inert and nickel-free surface that won’t flake. The same technology is used in medical and aerospace applications. Titanium Nitride forms an ultra-hard, scratch-resistant layer that becomes part of the metal itself — not just a surface coating. The result is a deep black finish that resists wear, fading, and corrosion for long-lasting beauty and performance.
Invictus Threadless Titanium Jewelled Diamond Shaped Attachment. This threadless titanium jewelled diamond attachment features a small bezel set flat backed clear crystal on a 4 point diamond shape that measures 4mm x 6mm and is compatible with any Invictus Titanium Threadless Stem. Add a little shine to your piercings, you deserve it!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Titanium 5 Opal Cluster Threaded Tops. TICL516 fits M0.9/16g and TICL514 fits M1.2/14g Internally Threaded Jewellery. Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets. Dimension: 13mm L x 4mm W x 3.3mm H
Titanium 3 Opal Cluster Threaded Tops. TICL316 fits M0.9/16g and TICL314 fits M1.2/14g Internally Threaded Jewellery. Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets. Dimension: 7mm L x 6.5mm W x 3.3mm H
Titanium 3 Gem Cluster Threaded Tops. TICL316 fits M0.9/16g and TICL314 fits M1.2/14g Internally Threaded Jewellery. Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets. Dimension: 7mm L x 6.5mm W x 3.3mm H
The Titanium Zirconline Internally Threaded Star is suitable for all internally threaded body jewellery (such as Dermal Anchors) with a 1.6mm (14ga) stem thickness. It is available in sizes of 4mm and 5mm in Clear Crystal or Plain! This article is also available in the Titanium Highline (DSI), Titanium Blackline (KSI), in the Steel Basicline (SLS) and in the Steel Blackline (MYA).
The Titanium Zirconline Clip In Ball is a replacement clip in ball for the Titanium Zirconline closure rings (GTR/GBC).This product is also available in Titanium Highline (TLB) and in Titanium Blackline (KLB).
This Titanium Meridian Blue Internally Threaded Disc is certainly eyecatching! The colour of the gem shifts through deep purples, blues, pinks and gold depending on the angle it is viewed at. Available in 3mm, 4mm and 5mm.
ATSM F-136 Titanium Internally Threaded Flower Attachment. Featuring seven Swarovski Zirconia gems in a titanium setting. Also avaliable in Black Titanium (BFL).
Titanium Highline Basic Threaded Balls for all external thread sizes from 1.0mm to 2.4 mm. Available in different ball diameters and colours Dark Blue (DB), Light Blue (LB), Dark Green (DG) and Violet (VT).This article is also available in the Titan Blackline (KTB). the Titan Zirconline (GTB).
The Titanium Highline Multicut Jewelled Threaded Ball is compatible with 1.6mm (14ga) external threads and is available in 4mm, 5mm or 6mm diameters. Choose one of 13 different stone colours: Crystal Clear (CC)., Crystal AB (AB), Light Blue (LB), Light Siam (LS), Sapphire Blue (SB), Light Green (LG), Blue Zircon (BZ), Emerald Green (EG), Amethyst (AM), Fuchsia (FU), Rose (RS), Light rose (LR) and Red (RE)!
The Titanium Highline Internally Threaded Jewelled Star is made from premium grade titanium and is suitable for all internally threaded body jewellery and Dermal Anchors with a 1.6mm (14ga) stem thickness. It is available in diameters of 4mm and 5mm with a colour choice of Crystal Clear (CC), Red (RE), Light Blue (LB), Rose (RS) or Black (BK). This article is also available in Titanium Blackline (KSICC) and in Titanium Zirconline (GSICC)!
The Titanium Highline Clip In Ball is designed to clip into a ball closure ring using a ring opening tool. Made of premium quality titanium, this product is available in various sizes and anodised colours! Wildcat also carry this product in Blackline (KTB), Zirconline (GCB) and in Steel Basicline (CIB).
The Titanium Blackline Jewelled Threaded Ball is available in both 1.2mm (16ga) and 1.6mm (14ga) threads. In 1.2mm (16ga) they are available with 3 or 4mm diameters and with a 1.6mm (14ga) thread they are available in 4, 5 or 6mm diameters. Choose your favourite out of 12 different colours!This article is also available in the Titanium Highline (XSJ). the Titanium Zirconline (GSJ). the Steel Basicline (SJB) and in the Steel Blackline (KXJ)!
The Elstern Micro Cones are made from premium acrylic and are UV reactive! They cannot be autoclaved and are available in 8 different colours!Thread Compatibility: 1.2mm (16ga)Cone Size: 3mm x 3mmColour Options: Green, Purple, Black, Blue, Clear, Pink, Orange, Red
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Invictus Threadless Titanium Beaded Edge Jewelled Cluster Attachment. This threadless titanium attachment features 12 beads around the edge of a 4mm clear bezel set cubic zirconia for a stand-out piece that can be placed anywhere! Compatible with any Invictus Titanium Threadless Stem. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish. To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment. Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery. The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory. The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Bright Gold Trinity Prong Set Attachment for Internally Threaded Jewellery. Available with a 0.9mm thread to suit 1.2mm (16ga) Internally Threaded Jewellery, or with a 1.2mm thread to suit 1.6mm (14ga) Internally Threaded Jewellery.
24Kt Gold PVD Titanium Internally Threaded Low-Profile Bezel Set Synthetic Opal Dermal Top. Our newest collection of internally threaded flat bezel tops, feature a low profile that sits flush with the piercings. Great for surface, dermal, & basic bezel piercings. Synthetic Opal in 7 colour options: Green, Purple, Blue, Black, Pink, Red and White. These tops are great for our surface bars, floating navels, labret posts and dermal bases. Material sourced in the USA. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process. The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings. The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.
24Kt Gold PVD Titanium Threadless Flat Base Low Profile 4 Prong Princess Cut Gem Top. These Threadless Tops are with 25g durable Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewellery line. Pin Size: 0.45mm x 4.7mm. The low-profile design provides a sleek and modern look, perfect for those who want a subtle yet stylish piece with flat bottom which allows the top to fit the base seamlessly. These tops feature a smooth, small, & flat base on the backside which transforms into a rounded smooth cup setting. The 4 prongs securely hold the square shaped gemstone in place while keeping it close to the skin. The mounting allows light to pass through the gem, enhancing its sparkle without protruding significantly from the piercing. The gold colour, once deposited, stays bonded to the titanium, and does not flake or wear off. Gold PVD is not the same as gold plating, though the two are often confused, as it is more durable and long-lasting. It has a high resistance to daily wear and tear, and is an attractive, more affordable option to solid gold jewellery. 24kt gold is the purest form of gold. More information is available in the FAQ section. Our Clear CZ gem has expanded in sizes to 5mm, 6mm, 7mm and 8mm. The Lot # & "JPN" will appear on our label of the bag of jewellery which indicates that it is sourced and milled from titanium directly made in Japan, a DFARS compliant country for titanium. We have corresponding mill certificates for these styles which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process. The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings. The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.
Titanium Threadless Round Bezel Set Inverse Gem Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Pin Size: 0.45mm x 4.7mm.Inverse-set gem tops are set in a bezel that frames the back of the gemstone. This allows the intricate facets and cuts of the stone to be seen from the back, creating a striking effect.The tops feature gemstones that are set in a way that showcases their reverse side, creating a mesmerizing sparkle from multiple angles & offering a fresh perspective on classic bezel gem tops.These tops are great for our surface bards, floating navels, labret posts and dermal bases.Material sourced in the USA.
Titanium 4 Opal Cluster Threaded Tops. TICL416 fits M0.9/16g and TICL414 fits M1.2/14g Internally Threaded Jewellery. Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets. Dimension: 7mm L x 6mm W x 3.3mm H
16g 24Kt Gold PVD Titanium Internally Threaded Low-Profile Bezel Set Swarovski Crystal Dermal Top. Our newest collection of internally threaded flat bezel tops, feature a low profile that sits flush with the piercings. Great for surface, dermal, & basic bezel piercings. Genuine Swarovski Crystals in 7 colour options: Amethyst, Aurora Borealis, Clear, Emerald, Jet, Pink and Blue Sapphire. 16g 2.5mm, 3mm and 4mm bezel. Material sourced in the USA. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process. The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings. The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.
