Titanium Threadless Prong Set Marquise CZ 2-Cluster Top. Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewelry line. Pin Size: 0.45mm x 4.7mm. Size: 6.30mm (L) x 4.13mm (W) x 1.85mm (THK). This Threadless Top is made from Implant Grade Titanium TI-6AL-4V ELI ASTM F136 with 25g d
Titanium Threaded 5.25mm Flower Top fits M0.9 or 18g/16g Internally Threaded Jewelry. Made of only TI-6AL-4V ELI ASTM F136 with Bezel Sets Gems inside Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewelry and it's fully autoclaveable.
GSJ Titan Zirconline Jewelled Threaded Ball The balls for the externally threaded barbells of the Titan Zirconline are available with classy rhinestones. too! The balls are available in different combinations of diameter. threadsize and colour. Available stone colours are: aurora boreal (AB). Amethyst (AM). Blue Zircon (BZ). Capri Blue (CB). Crystal Clear (CC). emerald Green (EG). light Blue (LB). sapphire Blue (SB) and Red (RE). Available combinations: Thread: 1.0 mm Colour: AM. BZ. CB. CC. EG. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. AM. BZ. CB. CC. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. CC. LB Ball: 4.0 mm Thread: 1.6 mm Colour: AB. AM. BZ. CC. EG. LB. RE. SB Ball: 4.0 mm Thread: 1.6mm Colour: AB. AM. BZ. CC. LB. EG. SB Ball: 5.0 mm Thread: 1.6 mm Colour: AB. BZ. CC. EG. LB. SB. RE Ball: 6.0mm During the coating of our jewellery by the physical vapour deposition system a thin and abrasion-resistant coat is laid on the jewellery. It complies around the Titan like a covering. without needing any further processing. The advantage of this kind of colour adaption to Black (Titan Blackline) and gold (Titan Zircoline) is. that the characteristics of the Titan are not influenced by its coloration. The biocompatibility is ensuRed. as this process is also used in the medical science (e.g. for implants). The article can. like all basics. be sterilised in an autoclave and due to the skin friendliness of the material it is absolutely harmless to allergic persons. This article is also available in the Titan Highline (XSJ) and in the Titan Blackline (KTJ).
These short (25mm) tapers for internally threaded jewellery are perfect for installing new jewellery or piercing smoothly with needle blades. Made from 316L Stainless Steel, these are autoclave safe. Avaliable in 0.8mm and 0.9mm and 1.2mm
Clear crystal starburst half internally threaded labret. Available in silver and gold colours. Made from 316L surgical stainless steel and gold alloy. 1.2mm (16Ga), Length 8mm
Add some sparkle with this Multi Jewelled Barbell. Suitable for most ear piercings, this piece features 5 gems with the largest in the middle, flanked by smaller gems on either side. 1.2mm (16ga) x 6mm Clear Crystal.
The Bioplast Black Barbell is made of Bioplast, a flexible synthetic material that has been proven to be bio-compatible.They are available in a 1.6mm (14ga) stem thickness and in stem lengths of 12 to 20mm (in two increments). Being flexible and softer than metal, Bioplast is perfect for jewellery that will be worn in the mouth as well as for retainers. This product is also available in White (WBL).
The Titanium Highline Cone Shaped Jewelled Nostril Stud has a wonderful cone setting that ends in a flush/flat position when wearing. The cone has a premium processed crystal which is available in many different colours, Crystal AB (AB), Blue Zircon (BZ), Clear Crystal (CC), Capri Blue (CB), Fuchsia (FU), Red (RE), Sapphire Blue (SB), Light Sapphire (LS), Light Green (LG), Rose (RS) and Light Blue (LB). Pony-tail stem style and in a 1.0mm (18ga) stem thickness.
The Screw in Ball Ring from the Titanium Highline range is a fantastic heavy gauge option! As a lookalike to the Ball Closure Ring, it's ball screws into the ring which means that fitting the ball is quick and easy. It is made of premium quality Titanium! The following sizes are available: Ring Thickness 4.0mm (6ga) is available in 12, 15, 19 and 22mm diameters Ring Thickness 5.0mm (4ga) is available in 15, 19 and 22mm diameters Ring Thickness 6.0mm (2ga) is available in 15, 19 and 22mm diameters Ring Thickness 7.0mm is available in 15, 19 and 22mm diameters Ring Thickness 8.0mm (0ga) is available in 15mm diameter Ring Thicknesses of 9mm, 10, and 12mm are available in a 19mm diameter This article is also available in the Steel Basicline (SIB) and as a Monster Ring (MON) for really large sizes.
Internally Threaded Titanium Prong Set Trinity. 0.9mm thread for 16g and 18g internally threaded jewellery. Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
The Titanium Zirconline Labret Stud is made of premium PVD coated titanium. With a 1.6mm (14ga) stem thickness, these labrets are available in lengths from 5mm up to 10mm (in 1mm increments).br>This article is also available in Titanium Blackline (KLS), Titanium Highline (XLS), Steel Basicline (LAB) and in Steel Blackline (KLZ). If you are looking for an alternative to titanium and steel, we suggest our BioPlast line (e.g. WAB).
The Jewelled Ball Closure Ring from our Titanium Zirconline range is available in a 1.2mm (16ga) ring thickness and has a flat back clip-in attachment making it comfortable for piercings where normally a ball would be uncomfortable. It has a 4mm in diameter clip-in attachment and the ring has an 8mm internal diameter. This product is also obtainable in the Titanium Highline(r) (XCF).
The Steel Basicline Mini Crystal Setting Nose Stud is a wonderful jewellery option for your nose piercing. It features a 2.0mm claw set clear crystal top and a pony-tail stem style resulting in a safe and secure fit. Available in both 0.8mm (20ga) and 1.0mm (18ga) stem thicknesses.All Steel Basicline products are made of premium 316L surgical stainless steel.
316L Surgical Stainless Steel Fake Ear Plugs with a picture design set under latex. The two 8mm base plates give the the illusion of wearing an 8mm plug. The Central Locating Stem is 1.2mm (16ga) and they are supplied with two O Rings.SOLD INDIVIDUALLY and cannot be autoclaved.
Add some sparkle with this Triple Jewelled Barbell. Suitable for most ear piercings, this piece features 3 clustered gems. 1.2mm (16ga) x 6mm Clear Crystal.
This wrap-around nose stud creates the look of a ring without the hassle! Available in Steel, Bright Gold PVD, Rose Gold PVD, and Black Steel PVD finishes. This Dog Leg nose stud measures 0.8mm (20ga).
The Titanium Blackline Micro Labret Stud is made of premium quality titanium with a PVD coating. Accept nothing but the best when you buy from the Titanium Blackline range, it is the original black body jewellery!This product has a 1.2mm (16ga) stem thickness and is available in stem lengths from 5mm up to 10mm (in 1mm increments) as well as 12mm.This product is available in Titanium Highline (ZLS), Titanium Zirconline (GZL), Steel Basicline (LAB) and in Steel Blackline (KLZ). If you are looking for an alternative to titanium or steel, we suggest our Bioplast line (e.g. WAB).The suitable replacement balls can be found in the Titan Blackline. they are called KTB.
The Bioplast Banana with surgical stainless steel balls combines the great flexible nature of Bioplast with the classic steel look. With a 1.2mm (16ga) stem thickness, these bananas are available in 8, 10 or 12mm stem lengths. 3mm balls for the perfect balance!
The Bioplast Black Navel Bananabell is made of Bioplast, a flexible synthetic material that has been proven to be bio-compatible.It has a stem thickness of 1.6mm (14ga) and is available in 8mm to 12mm lengths. It comes with a 5mm and an 8mm ball!Bioplast is a flexible synthetic material. whose bio-compatibility is proven and there are no problems sterilising this material in an autoclave! This product is also available in White (WNA).
The Titanium Smooth Segment Ring is a feature in our Titanium Highline(r) range and is the ultimate item when chasing a smooth seamless ring. Suitable for numerous body locations, they are lightweight and comfortable to wear. All the products in the Titanium Highline are made from premium quality titanium.They are available in various ring thickness, internal diameter combinations as well as anodized colour options.Ring Thickness: 1.2mm (16ga) - Internal Diameters: 8mm, 9mm and 10mmRing Thickness: 1.6mm (14ga) - Internal Diameters: 8mm, 10mm and 12mmRing Thickness: 2.0mm (12ga) - Internal Diameters: 10mm, 13mm, 16mm and 19mmRing Thickness: 2.4mm (10ga) - Internal Diameters: 13mm, 16mm and 19mmRing Thickness: 3.0mm Internal Diameters: 12mm, 15mm, 19mm and 22mmRing Thickness: 4mm (6ga) Internal Diameters: 12mm, 15mm, 19mm and 22mmRing Thickness: 5mm (4ga) Internal Diameter: 13mm, 15mm, 19mm and 22mmRing Thickness: 6mm (3ga) Internal Diameter: 13mmThis product is also available in Steel Highline (SSR), Titanium Zirconline (GSR), Titanium Blackline (KSR) and in Steel Basicline (SSR).Please Note: Tools may be required to insert/remove this product. If you have any questions please contact us.
Invictus Threadless Titanium Prong Set Gem Trinity Attachment. This threadless titanium prong set gem trinity attachment measures 5mm in diameter, comes in various colours and fits into any Invictus Titanium Threadless Stem. Choose from a variety of colors for this unique three-stone colored cubic zirconia threadless top. Made from titanium, it is an ideal piece for fresh piercings as well as jewelry upgrades. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish. To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment. Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery. The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory. The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Prong Set Synthetic Opal Attachment.This threadless titanium prong set synthetic opal attachment comes in a 2.5mm, 3mm, and 4mm Synthetic Opal in various colours, and fits into any Invictus Titanium Threadless Stem. These threadless titanium and synthetic opal tops are available in a selection of colors (purple, blue, and white) and sizes for the perfect look and fit for any desire.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
