Titanium Internally Threaded 4 Prong Princess Cut Gem Top. M0.9/16g fits Internally Threaded Jewellery. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). The low-profile design provides a sleek and modern look, perfect for those who want a subtle yet stylish piece with flat bottom which allows the top to fit the base seamlessly. New gem colours added to our prong set princess cut tops now available in Aurora Borealis, Amethyst, Blue Topaz and Black. These tops feature a smooth, small, & flat base on the backside which transforms into a rounded smooth cup setting. The 4 prongs securely hold the square shaped gemstone in place while keeping it close to the skin. The mounting allows light to pass through the gem, enhancing its sparkle without protruding significantly from the piercing. The Lot # & "JPN" will appear on our label of the bag of jewellery which indicates that it is sourced and milled from titanium directly made in Japan, a DFARS compliant country for titanium. We have corresponding mill certificates for these tops which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability.
24Kt Gold PVD Titanium Internally Threaded 4 Prong Princess Cut Gem Top. To secure the inside bar or base, add a slight bend to the pin by simply inserting the pin halfway and pushing the top to one side. The low-profile design provides a sleek and modern look, perfect for those who want a subtle yet stylish piece with flat bottom which allows the top to fit the base seamlessly. New gem colours added to our prong set princess cut tops now available in Aurora Borealis, Amethyst, Blue Topaz and Black. These tops feature a smooth, small, & flat base on the backside which transforms into a rounded smooth cup setting. The 4 prongs securely hold the square shaped gemstone in place while keeping it close to the skin. The mounting allows light to pass through the gem, enhancing its sparkle without protruding significantly from the piercing. The Lot # & "JPN" will appear on our label of the bag of jewellery which indicates that it is sourced and milled from titanium directly made in Japan, a DFARS compliant country for titanium. We have corresponding mill certificates for these styles which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process. The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings. The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.
16g Black PVD Titanium Internally Threaded Low-Profile Bezel Set Swarovski Crystal Dermal Top. Our newest collection of internally threaded flat bezel tops, feature a low profile that sits flush with the piercings. Great for surface, dermal, & basic bezel piercings. Genuine Swarovski Crystals in 7 colour options: Amethyst, Aurora Borealis, Clear, Emerald, Jet, Pink and Blue Sapphire. 16g 2.5mm, 3mm and 4mm bezel. Material sourced in the USA. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with Titanium Nitride (TiN) using the Physical Vapor Deposition (PVD) process. The PVD coating bonds at the atomic level to the titanium, creating a chemically inert and nickel-free surface that won’t flake. The same technology is used in medical and aerospace applications. Titanium Nitride forms an ultra-hard, scratch-resistant layer that becomes part of the metal itself — not just a surface coating. The result is a deep black finish that resists wear, fading, and corrosion for long-lasting beauty and performance.
24Kt Gold PVD Titanium Internally Threaded Flat Base Low Profile 4 Prong Round Gem Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136) with 25g durable Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewellery line. Pin Size: 0.45mm x 4.7mm. Our internally threaded Version 2 prong set gem tops are now available in 24Kt Gold PVD. These tops feature a smooth, flat base on the backside which transforms into a rounded smooth cup setting with 4 prongs that securely hold the gemstone in place while keeping it close to the skin. The mounting allows light to pass through the gem, enhancing its sparkle without protruding significantly from the piercing. The Lot # & "JPN" will appear on our label of the bag of jewellery which indicates that it is sourced and milled from titanium directly made in Japan, a DFARS compliant country for titanium. We have corresponding mill certificates for these styles which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability. Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process. The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings. The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.
Titanium Threadless Round Prong Set Inverse Gem Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Pin Size: 0.45mm x 4.7mm.These tops feature a scalloped prong setting where the prongs are shaped in a curved, scallop-like design, rather than being straight or angular. The "scallops" create a soft, rounded look around the gemstone, offering a more decorative and elegant appearance compared to traditional prong settings. The prongs gently curve over the gemstone’s edges, creating a flowing, almost flower-like design around the stone. This setting style can enhance the stone's visual appeal by adding a delicate, romantic touch, often making it appear more ornate without sacrificing the security that prongs provide. The gemstones are set in reverse, showcasing the pointed side of the stones, creating a unique and striking look. This unique setting technique adds an edgy and contemporary feel to the design.The Lot # & "JPN" will appear on our label of the bag of jewellery which indicates that it is sourced and milled from titanium directly made in Japan, a DFARS compliant country for titanium. We have corresponding mill certificates for these styles which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability. Threadless
1.6mm (14g) Titanium Internally Threaded Round Bezel Set Inverse Gem Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136).Inverse-set gem tops are set in a bezel that frames the back of the gemstone. This allows the intricate facets and cuts of the stone to be seen from the back, creating a striking effect.The tops feature gemstones that are set in a way that showcases their reverse side, creating a mesmerizing sparkle from multiple angles & offering a fresh perspective on classic bezel gem tops.These tops are great for our surface bards, floating navels, labret posts and dermal bases.Material sourced in the USA.Gem Type: Cubic Zirconia
Delicate and dazzling, the 14KT Gold 4-Prong Round Opal Top features a brilliant white opal held securely by four prongs, allowing light to enhance its captivating play of colour. Pin Size: 0.45mm x 4.7mm. Piece size 3mm (L) x 3mm (W) x 2mm (THK). 0.8mm (20g) Each piece includes extended threading for a tighter hold that resists loosening over time, ensuring lasting performance and precision. Standard M0.9 threading used in titanium can weaken gold’s thinner walls, leading to cracks or distortion. The M0.8 thread size was engineered to solve this issue — offering stronger structural support, lower defect rates, and a more secure connection between top and base. All Invictus 14KT Gold M0.8 Threaded Tops are designed exclusively for use with Invictus 14KT gold M0.8 labret bases. The longer threading provides a tighter, more secure fit — ensuring durability, alignment, and long-term wearability.
16g Titanium Internally Threaded Round Bezel Set Inverse Gem Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136).Inverse-set gem tops are set in a bezel that frames the back of the gemstone. This allows the intricate facets and cuts of the stone to be seen from the back, creating a striking effect. The tops feature gemstones that are set in a way that showcases their reverse side, creating a mesmerizing sparkle from multiple angles & offering a fresh perspective on classic bezel gem tops. These tops are great for our surface bards, floating navels, labret posts and dermal bases. Material sourced in the USA. 16g M0.9. Internally Threaded. Gem Type Cubic Zirconia
The 14KT Gold Nautical Star Top embodies balance, direction, and timeless style. Its faceted star design reflects light from every angle, creating a bold yet elegant shine. Crafted from solid gold and finished to perfection, it adds a touch of sophistication to any look. Pin Size: 0.45mm x 4.7mm. Piece size
The 14KT Gold 5-Cluster Marquise Opal Fan Top radiates sophistication with five opals set in a fanned formation. Designed to mirror the soft curvature of the ear, it offers a stunning blend of structure and iridescence. Pin Size: 0.45mm x 4.7mm. Piece size 9mm (L) x 4.4mm (W) x 1.5mm (THK). 0.8mm (20g) Each piece includes extended threading for a tighter hold that resists loosening over time, ensuring lasting performance and precision. Standard M0.9 threading used in titanium can weaken gold’s thinner walls, leading to cracks or distortion. The M0.8 thread size was engineered to solve this issue — offering stronger structural support, lower defect rates, and a more secure connection between top and base. All Invictus 14KT Gold M0.8 Threaded Tops are designed exclusively for use with Invictus 14KT gold M0.8 labret bases. The longer threading provides a tighter, more secure fit — ensuring durability, alignment, and long-term wearability.
Soft and radiant, the 14KT Gold 5-Petal Opal Flower Top blooms with five glowing opals surrounding a polished gold centre. A timeless design that balances elegance and natural charm. Pin Size: 0.45mm x 4.7mm. Piece size 4.4mm (L) x 4.4mm (W) x 1.5mm (THK). 0.8 (20g) Each piece includes extended threading for a tighter hold that resists loosening over time, ensuring lasting performance and precision. Standard M0.9 threading used in titanium can weaken gold’s thinner walls, leading to cracks or distortion. The M0.8 thread size was engineered to solve this issue — offering stronger structural support, lower defect rates, and a more secure connection between top and base. All Invictus 14KT Gold M0.8 Threaded Tops are designed exclusively for use with Invictus 14KT gold M0.8 labret bases. The longer threading provides a tighter, more secure fit — ensuring durability, alignment, and long-term wearability.
Brilliant and dimensional, the 14KT Gold Radiant Flare Cluster Top combines baguette and round CZs in a dynamic, symmetrical burst of light. Pin Size: 0.45mm x 4.7mm. Piece size 7.8mm (L) x 6.8mm (W) x 2mm (THK). 0.8mm (20g). Each piece includes extended threading for a tighter hold that resists loosening over time, ensuring lasting performance and precision. Standard M0.9 threading used in titanium can weaken gold’s thinner walls, leading to cracks or distortion. The M0.8 thread size was engineered to solve this issue — offering stronger structural support, lower defect rates, and a more secure connection between top and base. All Invictus 14KT Gold M0.8 Threaded Tops are designed exclusively for use with Invictus 14KT gold M0.8 labret bases. The longer threading provides a tighter, more secure fit — ensuring durability, alignment, and long-term wearability.
The corrugated round top combines classic symmetry with subtle radiance, featuring a textured finish and elegant milgrain border in solid 14KT yellow gold. Its longer M0.8 threading offers an exceptionally stable fit and smooth engagement for easy installation and secure wear. Pin Size: 0.45mm x 4.7mm. Piece size
Invictus Threadless Titanium Screw Attachment. This threadless titanium screw shaped attachment measures 4mm in diameter and is compatible with any Invictus Titanium Threadless Stem. Perfect for an industrial punk style project!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Cross Attachment. This threadless titanium cross shaped attachment measures 3.3mm x 5.2mm and is compatible with any Invictus Titanium Threadless Stem. A classic that never goes out of style!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Titanium 4 Gem Cluster Threaded Tops. TICL416 fits M0.9/16g and TICL414 fits M1.2/14g Internally Threaded Jewellery. Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets. Dimension: 7mm L x 6mm W x 3.3mm H
24Kt Gold PVD Titanium Threadless Heart Back Duality Labret (Base Only). Base 3.5mm. Gauge 1mm 18(g)Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process.The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings.The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.
14Kt Gold Braided Design Side Facing Hinged Segment Clicker with Prong Set Gem. The Hinged Segment Clicker offers an easy-to-use design with a minimal seam for an aesthetic that's similar to a segment ring without the stress of dealing with a segment that can get lost. The Hinged Segment Clicker is characterized by the hinged prong that snaps into place with a satisfying click. Perfect for Helix, Septum, and Cartilage. Made of solid 14kt nickel-free Gold. Shimmer in style with our new solid 14kt nickel-free gold cubic zirconia hinged segment clickers for effortless elegance! These clickers feature a stunning array of cubic zirconia, meticulously set to create a dazzling and eye-catching effect. The gems are evenly distributed across the surface, ensuring a balanced and harmonious appearance. Front facing styles are ideal for septum and daith piercings while side facing styles are ideal for nostril, lobe, helix, cartilage, rook, conch, tragus piercings. Discover the perfect blend of elegance and versatility for your piercings.
20g 14Kt Gold Prong Set 1mm Eternity Round Gem Side Facing Hinged Segment Clicker. Made of solid 14kt nickel-free Gold. The Hinged Segment Clicker offers an easy-to-use design with a minimal seam for an aesthetic that's similar to a segment ring without the stress of dealing with a segment that can get lost. The Hinged Segment Clicker is characterized by the hinged prong that snaps into place with a satisfying click. Perfect for Helix, Septum, and Cartilage. Another popular piercer request! Our new 20g hinged hoops are designed for optimal fit with five diameter options. These premium hoops feature a seamless hinge closure for effortless wear and pave-set outer gems for a luxurious look. These yellow gold hoops are perfect for everyday wear.
Crafted from solid 14KT yellow gold, this corrugated triangle top showcases a bold geometric design accented with a delicate milgrain edge for added texture and brilliance. Designed with extended M0.8 threading, it provides a stronger, more secure connection that resists loosening over time. Pin Size: 0.45mm x 4.7mm. Piece size 4.5mm (L) x 4mm (W) x 1.2mm (THK). 0.8mm (20g). Each piece includes extended threading for a tighter hold that resists loosening over time, ensuring lasting performance and precision. Standard M0.9 threading used in titanium can weaken gold’s thinner walls, leading to cracks or distortion. The M0.8 thread size was engineered to solve this issue — offering stronger structural support, lower defect rates, and a more secure connection between top and base. All Invictus 14KT Gold M0.8 Threaded Tops are designed exclusively for use with Invictus 14KT gold M0.8 labret bases. The longer threading provides a tighter, more secure fit — ensuring durability, alignment, and long-term wearability.
Surgical Steel Threadless Push In Nipple Barbell with Clear Crystal Cluster Ends. Available in both Gold and Silver. Bar Length: 14mmBar Thickness: 1.6mm (14g)
The Bioplast Circular Barbell Stem without Balls is a versatile basic! You can choose exactly the balls or attachments that you want from our huge range and combine it with this Circular Barbell Stem!
The material can be sterilised using the autoclave! Bioplast(tm) is a flexible synthetic material. That has been proved biocompatible. It does not contain any nickel and can not cause allergic reactions. It is gentle to wear and it is very convenient for first time insertion. Bioplast(tm) can be combined with most of the clasping balls of the Wildcat(c) assortment and is the perfect solution for usage of piercing jewellery while medical operations. .Any more questions? Don't hesitate to contact us! The Wildcat(c) staff will help and advise you!
16g Titanium Oval Shape Hinged Segment Clicker (for Rook Piercing). Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Gauge 1.2mm (16g). Piece size 6mm x 8mm.Reach a whole new level of comfort with these titanium (Ti-6AL-4V-ELI ASTM F136) oval shape hinged segment clickers.The oval shape design allows for a snug and more comfortable fit by allowing the jewellery to closely hug the piercing.The hinged design allows for easy insertion and removal, while the secure clicker closure ensures that they stay in place.Our 16g clickers are ideal for any rook or eyebrow piercing.
The externally threaded Pico Cone is suitable for external threads in both 1.2mm (16ga) and 1.6mm (14ga). It is also available in different cone sizes (width and height) and in both plain and colours: Dark Blue (DB), Light Blue (LB), Purple (VT) and plain polish Ti-Glo (TG).This article is also available in Titanium Zirconline (GXD) and in Titanium Blackline (KXD).
XTP Titan Highline ART-Tech Tropical Ball The Titan Highline ART-Tech Tropical Ball is formed in a complex lasercut-process and filled with our colouRed ART-Tech-material. It is suitable for all externally threaded body jewellery and Dermal Anchors. It is available with diameters of 5.0. 6.0 and 8.0 mm for all threads with a size of 1.6 mm. Choose one of 10 different colours: Black (BK). dark Blue (DB). dark Green (DG). light Blue (LB). light Green (LG). White (WH). Yellow (YE). orange (OR). Red (RE) and Pink (PK)! ART-tech is a patented material. which is especially suitable for the colour design of metallic. ceramic. synthetic and even organic and mineral surfaces. This stregthening composite has specific quality characteristics. which make it premium and enduring. ART-tech was developed especially for the piercing-industry and therefore it is totally biocompatible. It is understood that ART-tech is only used in the Titan Highline. our highest level of quality. Thanks to its high resistiveness. ART-tech-colours are perfectly suited for the refinement of jewellery. because they underline the beauty and aesthetics of the material.
The Titanium Highline Medilabâ„¢ is made of premium quality materials and has a specially designed biocompatible enamel friendly coating on the back of the labret. This coating helps when wearing it against gums and teeth. In the 1.2mm (16ga) stem thickness it is available in stem lengths from 6mm up to 10mm (in 1mm increments) with a 3mm diameter ball. In the 1.6mm (14ga) stem thickness it is available in the same lengths but with a 4mm diameter ball.
