The Ikon Plug range features a number of designs sealed into a premium processed, lightweight flared PMMA plug. This particular edition features a "Flaming Cherries" design and is available from 6mm up to 20mm (in 2mm increments).
The Ikon Plug range features a number of designs sealed into a premium processed, lightweight flared PMMA plug. This particular edition features a "Flaming Tiki" design and is available from 6mm up to 20mm (in 2mm increments).
The Ikon Plug range features a number of designs sealed into a premium processed, lightweight flared PMMA plug. This particular edition features the classic "Truckin'" design and is available from 6mm up to 20mm (in 2mm increments). Please note: some of the printed designs have faded slightly. The effected plugs in this design are: 6, 8, 10, 12, 14, 16, 18 and 20mm
WBLBioplast White Barbell The Bioplast White Barbell has a threadsize of 1.6 mm. With a length of 12.0 mm its balls have a diameter of 4.0 mm. In lengths of 14.0 to 20.0 mm (in steps of two) it is available with 5.0 mm-balls. The material can be autoclaved! This article is also available in Black (BML). Bioplast is a flexible synthetic material. whose bio-compatibility is proved. The material contains no nickel and can not cause allergic reactions. This is why the material supports the fast skin regeneration and is especially appropriate for beginners. Bioplast can be used with all Wildcat balls and attachments with suitable thread sizes. The Bioplast is adequate while regeneration. for usage in medical operations or as jewellery during pregnancy. It is ideal for permanent use. If there are any questions left please do not hesitate to contact us. The employees of the Wildcat corporation can give you further advice!
The Buffalo Horn Vortex Spiral Dots Tunnel is made of premium processed buffalo horn and is available from 10mm up to 20mm (in 2mm increments). The front rim is a bit flaredand has a handpainted Black and White flower design.Wildcat's natural jewellery is not sterilisable in an autoclave and should be treated with care. Wildcat also makes sure to meet all relevant conventions to protect the world's natural resources.
The Buffalo Horn Vortex Just Dots Tunnel is made of premium processed buffalo horn and is available from 10mm up to 20mm (in 2mm increments and except 16mm). The front rim is a bit flaredand has a handpainted Black and White flower design.Wildcat's natural jewellery is not sterilisable in an autoclave and should be treated with care. Wildcat also makes sure to meet all relevant conventions to protect the world's natural resources.
UCCSteel Basicline Unicorn ClawThe externally threaded Unicorn Claw is suitable for all external threads of 1.6 mm. It is available in 14.0 and 18.0 mm of length.
Flexi Micro Eyebrow Bananabells in assorted colours, cannot be autoclaved. Stem Thickness x Stem Length: 1.2mm (16g) x 8mm Colour Options: Yellow, Black, Pink, Purple, Dark Blue, White
Made from ASTM F-136 Titanium, these internally threaded discs feature Synthetc Pearl Cabochons. Avaliable in Cream, Black and a Rainbow Oil slick, the discs measure 5mm in diameter. Suitable for 14g internally threaded jewellery (1.2mm thread pattern).
The Titanium Opal Flower Top is a stylish way to change up your look for various ear piercings, dermal anchors, labret posts, and more. Seven 2mm opals are grouped together to resemble a flower with a total diameter of 6.7mm. It has internal 1.2mm threading with a 1.5mm long post, which is compatible with our standard 14g internally threaded jewelry.
Tweezer Nipple Clamp with a touch of glamour! Pinch and squeeze for as long as you please with our Tweezer and Clover-style Nipple Clamps .They are tweezer-style with vinyl-coated ends and a special curb link jewelry chain. A sliding ring adjusts the tightness anywhere from just enough to hold them on all the way up to a really severe pinch. They stay on, are easy to use, look good, and are extremely adjustable. These nipple clamps are sold as a pair (2) For personal entertainment only. Do not continue to wear if strong pain or nipple discolouration occurs.
The Titanium Highline Basic Cone is available in different colours and sizes enabling you to combine these cones with other stems/posts from across our range. Both 1.2mm (16ga) an 1.6mm (14ga) external thread options are covered as well as different height and widths. Colour options include: Dark Blue (DB), Dark Green (DG), Light Blue (LB), Purple (PU) and the plain polish Ti-Glo (TG). This article is also available in the Titanium Blackline (KMC). in the Titanium Zirconline (GMC) and in the Steel Blackline (KLC).
Invictus Threadless Titanium Screw Attachment. This threadless titanium screw shaped attachment measures 4mm in diameter and is compatible with any Invictus Titanium Threadless Stem. Perfect for an industrial punk style project!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Cross Attachment. This threadless titanium cross shaped attachment measures 3.3mm x 5.2mm and is compatible with any Invictus Titanium Threadless Stem. A classic that never goes out of style!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Titanium Tear Drop Threaded Ends 16g or m0.9 laser welded threading. Threads onto 16g m0.9 threaded jewelry. Available only in 5mm size. Manufactured out of Implant Grade Titanium TI-6AL-4V ELI ASTM F136.
Titanium 4 Gem Cluster Threaded Tops. TICL416 fits M0.9/16g and TICL414 fits M1.2/14g Internally Threaded Jewelry. Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets. Dimension: 7mm L x 6mm W x 3.3mm H
Create and customize your own ear project using these titanium straight barbell shafts. The ends of the shaft, which go through your piercing, are 14g and approximately 6mm long, while the center of the shaft is approximately 2mm thick and 25mm long. Both ends and the three center holes of the shaft have internal 1.2mm threading.
Create and customize your own ear project using these titanium straight barbell shafts. The ends of the shaft, which go through your piercing, are 14g and approximately 6mm long, while the center of the shaft is approximately 2mm thick and 25mm long. Both ends and the center hole of the shaft have internal 1.2mm threading.
