Titanium Threadless with Fixed Disk Floating Navel Bar is manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). The entire Invictus threadless line of tops and bases/pins are interchangeable. Pin Gauge: 25g. Stem Thickness 1.6mm (14ga), Stem Length 10.0mm, Top Diameter 4mm
Titanium Threaded 5.25mm Flower Top fits M0.9 or 18g/16g Internally Threaded Jewellery. Made of only TI-6AL-4V ELI ASTM F136 with Bezel Sets Gems inside Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewellery and it's fully autoclavable.
These Jeweller Quality Plain (Ball or Flat) Nose Studs are made from 925 Sterling Silver and come in two top options (1.7mm diameter ball or disc). They have a 0.8mm (20ga) stem thickness and in both dog leg stem style or straight (flat disc top only).
This piece features a multi-jewelled setting in the center of the bar. Made from Bright Gold PVD 316L Surgical Stainless Steel, this industrial barbell is also available in 316L Surgical Stainless Steel. Bar thickness is 1.2mm (16ga)
GSJ Titan Zirconline Jewelled Threaded Ball The balls for the externally threaded barbells of the Titan Zirconline are available with classy rhinestones. too! The balls are available in different combinations of diameter. threadsize and colour. Available stone colours are: aurora boreal (AB). Amethyst (AM). Blue Zircon (BZ). Capri Blue (CB). Crystal Clear (CC). emerald Green (EG). light Blue (LB). sapphire Blue (SB) and Red (RE). Available combinations: Thread: 1.0 mm Colour: AM. BZ. CB. CC. EG. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. AM. BZ. CB. CC. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. CC. LB Ball: 4.0 mm Thread: 1.6 mm Colour: AB. AM. BZ. CC. EG. LB. RE. SB Ball: 4.0 mm Thread: 1.6mm Colour: AB. AM. BZ. CC. LB. EG. SB Ball: 5.0 mm Thread: 1.6 mm Colour: AB. BZ. CC. EG. LB. SB. RE Ball: 6.0mm During the coating of our jewellery by the physical vapour deposition system a thin and abrasion-resistant coat is laid on the jewellery. It complies around the Titan like a covering. without needing any further processing. The advantage of this kind of colour adaption to Black (Titan Blackline) and gold (Titan Zircoline) is. that the characteristics of the Titan are not influenced by its coloration. The biocompatibility is ensuRed. as this process is also used in the medical science (e.g. for implants). The article can. like all basics. be sterilised in an autoclave and the material’s gentle properties make it well tolerated by people with metal sensitivities. This article is also available in the Titan Highline (XSJ) and in the Titan Blackline (KTJ).
The Thin Edge Tunnel from the Titanium Highline range is made of premium quality Titanium and is available from 2mm up to 22mm (in 1mm increments) and then from 24mm up to 30mm (in 2mm increments). They all are 8mm in width. These particular tunnels are not only internally threaded but have a 'slimline' edge, a much thinner rim than normal tunnels. Perfect for the larger lobes where something lightweight is required.
Invictus Threadless Titanium Prong Set Gem Flower Attachment.This threadless titanium prong set gem flower attachment is avaliable in a 4mm diameter with 7x 1.2mm gems, 5mm diameter with 7x 1.5mm gem and a 5.5mm diameter with 7x 1.5mm gems. Comes in various colours depending on the size, and fits into any Invictus Titanium Threadless Stem. Seven colored cubic zirconia gems make these threadless titanium flowers sparkle like crazy and they are available in so many color combinations, there's a perfect choice for any collection!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Material: 316L Surgical Stainless Steel Stem Thickness: 0.8mm (20ga) Cone Size: 2.3mm Diameter Stem Style: Straight (ready to be bent into either dog leg or pony-tail)
This devilish piece perfect for those with a cheeky attitude. Comes in two varations - Steel Silver with Clear Crystal or Gold with Red Crystal with the sizing 1.6mm (14GA) Thickness, 10mm Length with 5mm Ball.
Titanium Moon Threaded Ends 16g or m0.9 laser welded threading. Threads onto 16g m0.9 threaded jewellery. Available only in 5mm size. Manufactured out of Implant Grade Titanium TI-6AL-4V ELI ASTM F136.
These Clinical Grade Surgical Stainless Steel straight clamps are approximately 145mm in overall length. The surface of the holding end tapers to a small tip and is ribbed for maximum grip.
Invictus Threadless Titanium Prong Set Gem Trinity Attachment. This threadless titanium prong set gem trinity attachment measures 5mm in diameter, comes in various colours and fits into any Invictus Titanium Threadless Stem. Choose from a variety of colors for this unique three-stone colored cubic zirconia threadless top. Made from titanium, it is an ideal piece for fresh piercings as well as jewellery upgrades. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish. To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment. Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery. The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory. The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Dome Attachment.This threadless titanium dome attachment comes in a 2.5mm, 3mm, and 4mm dome size and fits into any Invictus Titanium Threadless Stem. Our titanium threadless dome top is available in multiple sizes for the best look and fit, and is a piece that is easy to use in an ear project or a fresh piercing.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
The rubber rings are used to fix various types of ear jewellery (Plugs, Top Hats, Single Flared Eyelets and Flesh Tubes as well as others such as spirals and crescents from the Wildcat ranges. It is always advisable to order these replacements with the original items, just so you have a replacement at hand in case! Available in white as well (under the product code ORC).
The classic Ball Closure Ring, made from premium quality PVD coated Titanium and available in many different sizes (both in thickness and diameter). They are extremely versatile making them suitable for various piercings! Combine this product with different clip-in balls from our enormous range!Sizes:1.0mm (18ga) is available in 6, 8, 10 and 12mm diameters.1.2mm (16ga) is available in 6, 7, 8, 10, 12mm diameters1.6mm (14ga) is available in 8, 10, 12, 14 and 16mm diameters2.0mm (12ga) is available in 10, 13, 16 and 19mm diameters2.4mm (10ga) is available in 10, 13, 16 and 19mm diametersThis product is also available in the Titanium Highline(r) (XTR/TUC). Titanium Zirconline(r) (GTR/GBC). Steel Blackline(r) (MBC) and in the Steel Basicline(r) (IMP/BCR). This jewellery is also available with a Clip-In Ball (KBR).
The Titanium Blackline Bananabell is made from premium quality PVD coated titanium. They have a 1.6mm (14ga) stem thickness and are available in 6, 8, 10 or 12mm stem lengths.This product is also available in Titanium Highline (XBN), Titanium Zirconline (GBN) and in Steel Basicline (BAN).
The Titanium Zirconline Jewelled Nostril Studs are made from premium quality Titanium and are available in a 1.0mm (18ga) stem thickness. They have a Pony Tail stem style for a safe and secure fit and are available in 4 popular colours (Clear Crystal, Dark Blue, Light Blue and Pink!
The Titanium Zirconline Internally Threaded Disc is suitable for all internally threaded body jewellery (especially Dermal Anchors) with a 1.6mm (14ga) stem thickness. They are available in 3, 4 or 5mm ! This product is also available in Titanium Blackline (KIF) and in Titanium Highline (XIF).
Snake dangle belly ring available in silver and gold colours. Made from 316L surgical stainless steel and gold alloy. 1.6mm (14Ga), Ball Diameter 5mm, Stem Length 10mm
