The Titanium Highline Micro Labret Stud has a 1.2mm (16ga) stem thickness and is available in stem lengths from 5mm up to 10mm (in 1mm increments) and in 12mm. It comes standard with a 3mm diameter ball.This article is also available in Titanium Blackline (KZL) and Titanium Zirconline (GZL).
Cross Chain Dangle Fake Plug. Available in Bright Gold, Black Steel and Steel. The cross measures 20mm in height, and is attached by a chain to a 8mm diameter plain disc. The overall length measures approximately 47mm. Made from 316L Surgical Steel with a brass attachment.
Perfect for ear projects, these barbells are made from 316L Stainless Steel and set with synthetic opal cabochons. Avalible with a 3mm, 4mm or 5mm bezel set white synthetic opal cabochon disc. Measures 16g x 6mm.
The Thin Edge Tunnel from the Steel Blackline range is made of premium quality PVD coated Surgical Stainless Steel and is available in 3mm up to 6mm (in 1mm increments) and then from 8mm up to 40mm (in 2mm increments). They all have an 8mm width. These particular tunnels are not only internally threaded but have a 'slimline' edge, a much thinner rim than normal tunnels.
LLBBioplast Clear Labret The Bioplast Clear Labret is. thanks to the dental enamel friendly material. ideal for the permanent use as labret. In a strength of 1.2 mm. it is available with lengths of 6.0 - 10.0 mm (in steps of one). the compatible ball has a size of 3.0 mm. In a strength of 1.6 mm the ball has a size of 4.0 mm. The material can be autoclaved without any problems. This article is also available in White (WAB) and in Black (BLA)! Bioplast is a flexible synthetic material. whose bio-compatibility is proved. The material contains no nickel and can not cause allergic reactions. This is why the material supports the fast skin regeneration and is especially appropriate for beginners. Bioplast can be used with all Wildcat balls and attachments with suitable thread sizes. The Bioplast is adequate while regeneration. for usage in medical operations or as jewellery during pregnancy. It is ideal for permanent use. If there are any questions left please do not hesitate to contact us. The employees of the Wildcat corporation can give you further advice!
Thanks to the rounded-square titanium bases that feature two large holes, these anchors make for extremely secure dermals, effectively allowing for long-term wear. Best suited for regions with thicker skin. 1.6mm stem thickness and available in 2mm, 2.5mm and 3mm stem heights, base measures 4mm x 8mm
1.6mm (14Ga) 24Kt Gold PVD Titanium Internally Threaded Double Bezel Round with Smooth Rounded Back & Fixed Bottom Navel.The Lot # & "JPN" will appear on our label of the bag of jewellery which indicates that it is sourced and milled from titanium directly made in Japan, a DFARS compliant country for titanium.We have corresponding mill certificates for these styles which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability.Made from implant-grade titanium Ti-6AL-4V-ELI ASTM F136 and coated with 24K gold through the Physical Vapor Deposition (PVD) process.The PVD process fuses pure gold to the titanium at the atomic level, creating a nickel-free, chemically stable surface that won’t peel or tarnish. It’s well suited to long-term wear and ideal for healed piercings.The 24K Gold PVD layer is highly resistant to scratches, fading, and discoloration. Because it bonds directly with the titanium surface, it maintains its radiant, golden shine and smooth feel through continuous wear.Gem Size 4mm & 6mm. Gems are Cubic Zirconia. Internally Threaded
Material: Titanium Highline Stem Thickness: 1.6mm Stem Height: 2.3mm Base Length: 7mm Disc Diameter: 4mm Disc Options: Clear Crystal (CC) or Plain For Professional Use Only
These Bioplast Labret Retainer are already conveniently pre-sterilized and pre-packaged so they can be worn straight away!Stem Thickness: 1.2mm (16ga)Stem Length: 6, 8, 10mmDisc Diameter: 2.5mm
Titanium Threadless Prong Set Marquise CZ 2-Cluster Top. Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewelry line. Pin Size: 0.45mm x 4.7mm. Size: 6.30mm (L) x 4.13mm (W) x 1.85mm (THK). This Threadless Top is made from Implant Grade Titanium TI-6AL-4V ELI ASTM F136 with 25g d
High Quality Precision All 316L Surgical Steel Hinged Segment Hoop Ring with Lined Pyramid Cuts Chevron. 1.2mm (16GA) Thickness and 8mm Internal Diameter. Gold PVD
18ct Gold 1.5pt Diamond Cone Set Nose StudWhite Gold or Yellow Gold availableStem Thickness: 0.8mm (20ga) Stem Style: Dog Leg or Pony TailSetting Diameter: 1.8mm
Made from premium grade G23 surgical titanium, these labrets are the perfect basic jewellery. Have a look through our fabulous range of internally threaded attachments to create something unique!
316L Surgical Stainless Steel Side Threaded Jewelled Balls in two sizes and available in assorted colours. Barbells not included, for display purposes only.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 5mm, 6mm or 8mmColour Options: Pink, Clear Crystal, Crystal AB, Aqua, Blue Zircon, Light Green, Fuchsia, Light Sapphire, Sapphire, Amethyst
This new tool is ultra thin, allowing you to easily slide it under the dermal top without applying unnecessary pressure on the actual anchor. The tool will grab the base and hold it in place so you can easily unscrew the top. It is only 0.25mm Thick and the hole in the middle of the clasp is 1.4mm wide.
Smooth and seamless, the Steel Highline(r) Smooth Segment Ring are extremely popular! Made from surgical stainless steel, these segment rings have a removeable section of the ring for insertion and removal. This removeable section slots back in to the ring leaving barely any trace and a practically seamless ring.The Segment Ring is suitable for various body piercings and comes in a number of ring thickness/internal diameter combinations.Ring Thickness: 1.2mm (16ga) - Internal Diameter: 8mm and 10mmRing Thickness: 1.6mm (14ga) - Internal Diameter: 10mm, 13mmRing Thickness: 2.0mm (12ga) - Internal Diameter: 10mm, 13mm, 15mm and 19mmRing Thickness: 2.4mm (10ga) - Internal Diameter: 10mm, 13mm, 15mm and 19mmRing Thickness: 3.2mm (8ga) Internal Diameter: 13mm, 15mm and 19mmRing Thickness: 4.0mm (6ga) Internal Diameter: 13mm, 15mm and 19mmRing Thickness: 5mm (4ga) Internal Diameter: 13mm, 15mm, 19mmRing Thickness: 6mm (3ga) Internal Diameter: 13mm, 15mm and 19mm.This product is also available in Titanium Highline(r) (XSR), Titanium Zirconline(r) (GSR), Titanium Blackline(r) (KSR) and in Steel Basicline(r) (SSR).Please Note: Tools may be required to insert/remove this product. If you have any questions please contact us.
The Steel Basicline Basic Navel Bananabell is made from premium grade surgical stainless steel and is the perfect solid navel banana. With a 16mm (14ga) stem thickness, this navel banana has a 5mm top ball and 8mm bottom ball combination and is available in 6mm, 8mm, 10mm or 12mm stem lengths. This product is also available in Titanium Highline (XNB), Titanium Zirconline (GNB) and in Steel Blackline (KKB).
Invictus Threadless 14ct Yellow Gold Small Tri-Bead Attachment. This 14ct gold small tri-bead trinity attachmend is threadless and low profile for a comfortable and attractive piece of piercing jewellery. A perfect dainty piece for anywhere, but looks particularly great in nose and ear piercings! Measures 2.8mm x 2.7mm and is compatible with any Invictus Titanium Threadless Stem.Manufactured from solid 14ct nickel-free Gold with a durable 316LVM ASTM F-138 Implant Grade Steel Pin designed to be practical and easy to use.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Cone Attachment. This threadless titanium cone attachment measures 3mm x 4mm and fits into any Invictus Titanium Threadless Stem. Punky and funky, this threadless titanium spike cone top is small enough to be subtle, yet still makes a bold statement. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish. To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment. Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery. The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory. The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Barbell Stem.Our threadless titanium barbell stem comes in multiple gauges and lengths, and is designed to accommodate any Invictus threadless top. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.PLEASE NOTE: This product listing is for the stem ONLY; Attachments are sold seperately.
