Internally Threaded Titanium Prong Set Gem. Available Sizes: 3mm, 4mm. 0.9mm thread for 16g and 18g internally threaded jewellery. Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
The Titanium Opal Disc for Internally Threaded Jewellery is suitable for dermal anchors and internally threaded jewellery with a 1.6mm (14ga) stem thickness. Available in Dark Lapis (DL), Deep Violet (DV), Green (GR), Reddish Black (RB), White (WH) and Light Ruby (LR) as well as 4mm and 5mm diameters.
Titanium Threaded 5.25mm Flower Top fits M0.9 or 18g/16g Internally Threaded Jewellery. Made of only TI-6AL-4V ELI ASTM F136 with Bezel Sets Gems inside Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewellery and it's fully autoclavable.
GSJ Titan Zirconline Jewelled Threaded Ball The balls for the externally threaded barbells of the Titan Zirconline are available with classy rhinestones. too! The balls are available in different combinations of diameter. threadsize and colour. Available stone colours are: aurora boreal (AB). Amethyst (AM). Blue Zircon (BZ). Capri Blue (CB). Crystal Clear (CC). emerald Green (EG). light Blue (LB). sapphire Blue (SB) and Red (RE). Available combinations: Thread: 1.0 mm Colour: AM. BZ. CB. CC. EG. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. AM. BZ. CB. CC. LB. SB. RE Ball: 3.0 mm Thread: 1.2 mm Colour: AB. CC. LB Ball: 4.0 mm Thread: 1.6 mm Colour: AB. AM. BZ. CC. EG. LB. RE. SB Ball: 4.0 mm Thread: 1.6mm Colour: AB. AM. BZ. CC. LB. EG. SB Ball: 5.0 mm Thread: 1.6 mm Colour: AB. BZ. CC. EG. LB. SB. RE Ball: 6.0mm During the coating of our jewellery by the physical vapour deposition system a thin and abrasion-resistant coat is laid on the jewellery. It complies around the Titan like a covering. without needing any further processing. The advantage of this kind of colour adaption to Black (Titan Blackline) and gold (Titan Zircoline) is. that the characteristics of the Titan are not influenced by its coloration. The biocompatibility is ensuRed. as this process is also used in the medical science (e.g. for implants). The article can. like all basics. be sterilised in an autoclave and the material’s gentle properties make it well tolerated by people with metal sensitivities. This article is also available in the Titan Highline (XSJ) and in the Titan Blackline (KTJ).
Invictus Threadless Titanium Prong Set Synthetic Opal Attachment.This threadless titanium prong set synthetic opal attachment comes in a 2.5mm, 3mm, and 4mm Synthetic Opal in various colours, and fits into any Invictus Titanium Threadless Stem. These threadless titanium and synthetic opal tops are available in a selection of colors (purple, blue, and white) and sizes for the perfect look and fit for any desire.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Invictus Threadless Titanium Side Facing Bezel Set Gem Attachment. This threadless titanium side facing bezel set gem attachment comes in a 2.5mm, 3mm, 4mm and 5mm Swarovski Crystal in various colours and fits into any Invictus Titanium Threadless Stem. Our threadless side-facing top is made from titanium and genuine Swarovski crystal - and comes in a selection of colors and sizes to ensure it will look its best no matter where it is placed. Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish. To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment. Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery. The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory. The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
Titanium Threadless 4 Cluster Fan Shape Top with Prong Set Marquise CZ/Opal. These Threadless Tops are made from Implant Grade Titanium TI-6AL-4V ELI ASTM F136 with 25g durable Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewelry line. Pin Gauge: 24g x 4.5mm (L). Pin Size: 0.45mm x 4.7mm. Piece size 10.7mm (L) x 5.2mm (W) x 1.8mm (THK)
Titanium Threaded Prong Set Synthetic Opal Top for Internally Threaded Jewellery. Made of only TI-6AL-4V ELI ASTM F136 with Synthetic Opal Gem Top perfect for piercing Internally Threaded piece of jewellery.
Titanium Threaded 6.60mm Flower Top available for M.09/16g or M1.2/14g Internally Threaded Jewellery. Made of only TI-6AL-4V ELI ASTM F136 with Prong Set Gems. This Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewellery. Fully autoclavable.
Titanium Internally Threaded Flat Disc. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Fits M1.2/14G and M0.9/16G Internally Threaded Jewellery. Simple and classic, this flat titanium disc is available in a selection of sizes and internally threaded. A versatile, piece it can be used to create wild looks as well as subtle ones. We are transitioning our material to Japanese Titanium. Several of the colours/sizes have been updated already to Japanese Titanium. The Lot # & "JPN" will appear on the label which indicates that it is sourced and milled from titanium made in Japan, a DFARS compliant country for titanium. We have corresponding mill certificates for these tops which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability.
Titanium Threadless 5 Marquise Staggered Cluster Prong Gem Top. This Threadless Top is made from Implant Grade Titanium TI-6AL-4V ELI ASTM F136 with 25g durable Titanium Pin designed to be practical and easy to use. Fitting all sizes of pins and bases in our threadless body jewellery line. Pin Size: 0.45mm x 4.7mm. Piece size is 12.4mm (L) x 5.5mm (W) x 2.2mm (THK). Add a touch of sophistication to your jewellery collection with our marquise staggered gem tops. Each top features five, beautifully set marquise gemstones, which are artfully arranged to create a unique and eye-catching appearance. The gemstones are secured by dual prongs on each end for extra security. When worn in various piercings, these tops exhibit a stunning visual effect that draws attention and adds a touch of elegance to your piercing. These gem tops are perfect for a variety of piercings, including: Cartilage: Add a bold statement to your cartilage, flat, helix, & conch piercings with the shimmering beauty of these gem tops. Lobes: Elevate your everyday look by wearing them in lobe or stacked lobe piercings or styled in multiple piercings, allowing for creative combinations and personalized looks. Conch: Boost the allure of a conch piercing with staggered gems climbing up the piercing. We have corresponding mill certificates for these tops which can be located on our website once logged in. The certificate includes the heat # & lot # for traceability.
Titanium Bezel Set Synthetic Opal and Gem Replacement Dimple Beads. Available in gem size 3mm,4mm and 5mm. Can fit 18ga, 16ga, 14ga and 12ga CBR'S. Manufactured out of Implant Grade Titanium (TI-6AL-4V ELI ASTM F136).
The Titanium Highline Micro Jewelled Discs are made from premium titanium and are suitable for all Skindivers with a 1.0mm (18ga) stem thickness. You have the choice of 2.5mm, 3.2mm and 4mm diameters as well as ten different colours choices! Crystal Clear (CC), Crystal AB (AB), Amethyst (AM), Blue Zircon (BZ), Light Blue (LB), Light Green (LG), Light Sapphire (LS), Red (RE), Rose (RS) and Sapphire Blue (SB).
Titanium 5 Gem Cluster Threaded Tops.
TICL516 fits M0.9/16g and
TICL514 fits M1.2/14g Internally Threaded Jewellery.
Made of Implant Grade High Polish Titanium (TI-6AL-4V ELI ASTM F136). 16g tops fits our 18g Labrets.
Dimension: 13mm L x 4mm W x 3.3mm H
Invictus Threadless Titanium Prong Set Synthetic Opal Flower Attachment.This threadless titanium prong set synthetic opal flower attachment is avaliable in a 4mm diameter with 7x 1.2mm opals and a 5mm diameter with 7x 1.5mm opals, comes in a variety of colours, and fits into any Invictus Titanium Threadless Stem. With seven synthetic opals, these threadless titanium flower tops are available in a selection of colors and both 4mm and 5mm sizes. There's a perfect opal flower for everyone and every piercing!Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
The Acrylic Darkside Threaded Ball is suitable for every jewellery with an external thread size of 1.6mm (16ga). The ball is very light and is available in different sizes! This ball can not be sterilised! The material is harmless if used as intended.
Titanium Threadless Radiant Corrugated Round Top. Manufactured from High Polish Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136). Pin Size: 0.45mm x 4.7mm. The new Radiant Corrugated Round Tops are designed with a signature corrugated face that amplifies light reflection, delivering high visual impact while maintaining a clean, low-profile form. Perfect for both subtle and statement looks; these tops offer versatile styling across multiple piercing placements. Key Features & BenefitsRadiant Corrugated Texture: Engineered for maximum light refraction, creating a multidimensional shine that enhances both single piercings and stacked arrangements. Low-Profile Design: Slim form makes this tops ideal for daily wear, minimizing bulk while maximizing brilliance.
Precision Engineering: Built with a smooth backing and secure threading (available in both internally threaded and threadless styles) for a comfortable, flush fit. Durability & Quality: Available in polished steel and luxurious 24K Gold PVD finish for long-lasting brilliance and gentle wear. Ideal Placement & VersatilityThese tops are crafted for a wide range of piercings, making them an essential addition for professional piercers and clients seeking versatile jewellery: Ear Styling: Perfect for lobes, helix, tragus, conch, and curated ear stacks. Facial Piercings: Suitable for nostrils, philtrum/medusa, and bite piercings. Oral Piercings: Smooth backing makes them comfortable for mouth placements. Multi-Piercing Arrangements: Low-profile design ensures they layer beautifully in complex, stacked looks.
The Coloured Synthetic Pearl is made from premium qualtiy acrylic and is not only available for 1.2mm (6ga) and 1.6mm (14ga) threads but also come in different diameter/colour combinations!
Genuine freshwater pearls! Due to being natural pearls, these clip-in attachments may not be totally spherical and sizes are approximate. This product cannot be autoclaved.
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
The PMMA Zebra Screw On Ball is made from premium processed acrylic and features a zebra print! It is suitable for all externally threaded jewellery with a 1.6mm (14ga) size thread and is available in 6mm and 8mm ball diameters.
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Our Screw-on Picture Balls are made from 316L surgical stainless steel with a latex insert. Suitable for temporary wear and cannot be autoclaved.Thread Compatibility: 1.6mm (14ga)Ball Diameter: 6mm
Bright Gold Trinity Prong Set Attachment for Internally Threaded Jewellery. Available with a 0.9mm thread to suit 1.2mm (16ga) Internally Threaded Jewellery, or with a 1.2mm thread to suit 1.6mm (14ga) Internally Threaded Jewellery.
