Invictus Threadless Titanium Flat Star Attachment.This threadless titanium flat star attachment measures 3.5mm in diameter and fits into any Invictus Titanium Threadless Stem. Our titanium threadless star is a great addition to a piercing project or for a stand-alone piercing. Stars are always a popular choice and this one is sure to be a favorite.Manufactured from TI6AL4V ELI ASTM F-136 Titanium with a mirror finish polish.To fix an attachment to a threadless stem, add a slight bend to the pin by simply inserting the pin half way and gently pushing the attachment to one side. Then push the pin fully inside the stem until the attachment fits securely. To tighten the fit, simply increase the bend of the pin. Start small, and don't bend the pin too far as you risk damaging the attachment.Continuing with our commitment to provide high quality body piercing products, we are proud to introduce our newest line, Invictus Threadless Body Jewellery.The line is made from implant grade titanium TI-6AL-4V ELI ASTM F136 and finished to a bright polish. It consists of barbells, curves, labret bases, balls and genuine Swarovski gem tops which are all completely interchangeable to create a full array of configurations while having to keep less inventory.The thin 25ga pins on our tops allows us to create jewellery starting from 20ga and tops as small as 1.5mm for piercings needing smaller sizes. A range of 14ct Gold tops are also available, with even more styles on offer through custom order.
The Titanium Highline Jewelled Threaded Ball is made of premium quality Titanium. It is available in different combinations of thread size and diameter: Thread: 1.0mm (18ga) - Diameter: 3.0 mm Thread: 1.2mm (16ga) - Diameter: 2.5, 3, 4mm Thread: 1.6mm (14ga) - Diameter: 4, 5, 6mm Thread: 2mm (12ga) - Diameter: 5, 6mm Choose your favourite twinkling rhinestone out of 17 different colours!This article is also available in the Titanium Blackline (KTJ), Titanium Zirconline (GSJ), Steel Basicline (SJB) and Steel Blackline (KXJ)!
These PTFE Barbell Component Pieces are made of quality PTFE and are a great base for a flexible and bio-compatible barbell.They are ready to be cut down to your desired length and combined with your choice of attachment threaded onto each end. Stem Thickness: 1.2mm (16ga) or 1.6mm (14ga)Stem Lengths: 15*, 30 or 50mm*15mm stem length only available in 1.2mm (16ga)
Add some sparkle with this Cascading Jewelled Barbell. Suitable for most ear piercings, this piece features 4 gems with the smallest at the top following down to the biggest at the bottom. If you were after the piece to taper from largest jewel to the smallest jewel, we recommend purchasing the opposite side to your piercing in the drop down menu. 1.2mm (16g) x 6mm CZ. Avaliable in a Left (DRP03.L.CZ) and Right (DRP03.R.CZ) side.
The Titanium Blackline Rattle Balls are completely unique to the Wildcat range! These attachments are made of titanium and are actually hollow but contain a heavy spherical ball. This encapsulated ball is three times heavier than the titanium outer, therefore with movement it causes a resonance throughout the barbell. Excellent for tongues, nipples and genitals.These balls are designed for 1.6mm internally threaded stems Available in varying diameter sizes.
Choose from either a ball or disc top nose stud in 18ct white or yellow gold. These nose studs have a 0.8mm (20ga) stem thickness and are available in dog leg or pony tail stem styles.
This charming navel is made out of 316L Surgical Steel and sizing 1.6mm (14GA) Thickness, 10mm Length with 5mm Ball. The Jewelled Hollow Heart with CZ Flower Center Navel is a must have this summer.
This wicked Navel of a Dragon Claw holding a black mysterious ball with a Skull Top is made out of 316L Surgical Steel and comes in the colour of Antique Gold & Antique Silver to give it more of a wicked look.Measurements of 1.6mm (14GA) Thickness & 10mm Length.
Made from PMMA and complete with a silicone o-ring, this is the perfect item to replace your existing jewellery (navel especially) if the situation arises.Stem Thickness: 1.6mm (14ga)Stem Length: 9mmCannot be autoclaved
The Steel Highline Flesh Tunnel are made of 316L surgical steel and are internally threaded to ensure an easy and smooth insertion.Available in sizes 3mm up to 12mm (in 1mm increments) and then from 14mm up to 20mm (in 2mm increments)
Titanium Threaded 6.60mm Flower Top available for M.09/16g or M1.2/14g Internally Threaded Jewellery. Made of only TI-6AL-4V ELI ASTM F136 with Prong Set Gems. This Flower Top perfect for piercing or adding a little sparkly to an existing Internally Threaded piece of jewellery. Fully autoclavable.
Elstern Micro Jewelled Balls are small diameter jewelled balls for standard size stems and posts! Made from 316L Surgical Stainless Steel, they are available in an assortment of colour options!Thread Compatibility: 1.6mmBall Diameter: 3mm
